Air Conditioning Inspection and Cleaning

Paris Heating and Cooling will perform an 18 point inspection for your air conditioning system. We will perform the following check on your air conditioner:

18 Point Air Conditioning Inspection

1. Lubricate blower & motor bearings (if equipped)
2. Check belt condition and tension (if equipped)
3. Check air conditioner cooling coil
4. Check system pressure
5. Take temperature drop across coil
6. Check condenser for level
7. Check thermostat and controls
8. Check condenser and clean
9. Check fan speed for summer operation
10. Check safety controls and correct operation & settings
11. Check superheat and adjust charge if needed
12. Check voltage and amperage draw
13. Check for correct rotation of fans/blowers
14. Check expansion valve and dryer flow
15. Check contactors and starters
16. Check start & run capacitors
17. Check air conditioner compressor
18. Clean condensate drain

Paris Heating and Cooling also has an 18 point furnace inspection. We will perform the following furnace checks:

18 Point Furnace Inspection

1. Lubricate blower motor & bearings (if equipped)
2. Check belt condition and tension (if equipped)
3. Install Standard furnace clean air filters
4. Check to make sure furnace flue is venting properly
5. Adjust burner for proper flame (if necessary)
6. Check condition of pilot and clean (if necessary)
7. Check manifold pressure
8. Check combustion
9. Check fan and limit control
10. Check pilot safety
11. Check heat anticipator
12. Check pressure regulator
13. Check burner operation
14. Check heat relay
15. Check safety controls
16. Check thermocouple
17. Check temperature rise through furnace
18. Check fan speed for winter operation
    

Please call Paris Heating or Cooling to schedule your furnace inspection or air conditioning inspection at 227-4512 or contact us by clicking here.